Archive

Posts Tagged ‘ams258dn01’

Nokia N85 / N86 AMOLED interfacing (& surprise) …

October 23, 2011 27 comments

Have a look at it :

Notice that it is an AMDN001 marked module (which is, in fact, real AMOLED from N85/86).

Now the surprise : it works with the command set known from E51/6500c LCDs…
Yes! No changes, just solder the wires, build +5V/-5V DC-DC converter & Voilla…

The DC-DC can looks like : (I’ve managed to homemade it on 2.5×3.0cm single sided PCB).
n86_tps65136_sch

TPS65136 is available in QFN package only, its tricky to solder it at home, but having any hot-air & flux should do the trick. Remember that thermal pad should be GND-ed (& soldered too, of course).

UPDATE #1: There is one error in schematic – the L1 inductor should be 2.2uH or 4.7uH instead of 10mH (ekhm… “hardly available” 🙂 ).
To successfully drive this AMOLED it is sufficient to have such wiring : D0-D7, RES, WR, DC for control, and power sources : 3V3, ELVDD, ELVSS.
There is no need for 1V8 and level shifters like LVC4245. Driving VIO pin (12) with 3.3V voltage we’re getting whole interface bus working at 3.3V. (Don’t know exact timing impact with such voltage change, but it works at full speed achievable with PIC32MX parallel master port)